ETQ DG6LE Owner's Manual download pdf (Page 15)

EASTERN TOOLS & EQUIPMENT INC Tele: (888)908-6200 Web Site: easterntools.com

2-6.3 Charging the battery 2-6.3 Charging the battery

Speed handle

(1) For the electric starter on the generator , the

12V battery is automatically charged through

the regulator on the side of the engine when it

is running.

(1) For the electric starter on the generator , the

12V battery is automatically charged through

the regulator on the side of the engine when it

is running.

(2) If the generator is not used for long periods of

time, the battery should be disconnected to

avoid energy loss from the battery.

(2) If the generator is not used for long periods of

time, the battery should be disconnected to

avoid energy loss from the battery.

(3)Do not connect the negative and positive

terminals of the battery together at any time.

Doing so will damage the battery and cause

serious injuries.

(3)Do not connect the negative and positive

terminals of the battery together at any time.

Doing so will damage the battery and cause

serious injuries.

(4) Do not reverse the polarities when attaching

the battery cables to the battery. Doing so

will damage both the battery and the electric

starter.

(4) Do not reverse the polarities when attaching

the battery cables to the battery. Doing so

will damage both the battery and the electric

starter.

(5) When charging the battery, the battery

produces flammable gases. Do not smoke,

let flames, and sparks get near the battery

while it is charging as this may cause a fire.

To avoid sparking while connecting the cables

to the battery, first, connect the cables to the

battery then to the motor. To disconnect

battery cables, first disconnect the motor end

of the cable.

(5) When charging the battery, the battery

produces flammable gases. Do not smoke,

let flames, and sparks get near the battery

while it is charging as this may cause a fire.

To avoid sparking while connecting the cables

to the battery, first, connect the cables to the

battery then to the motor. To disconnect

battery cables, first disconnect the motor end

of the cable.

2-7 Stopping the generator 2-7 Stopping the generator

(1) Take the electrical load off the generator. (1) Take the electrical load off the generator.

(2) Put the speed handle in the “RUN” position

and let the engine run for 3 minutes after

unloading. Do not stop the diesel engine

immediately let it warm down. Stopping the

diesel engine suddenly may raise the

temperature of the engine abnormally and

lock the nozzle and damage the diesel engine.

(2) Put the speed handle in the “RUN” position

and let the engine run for 3 minutes after

unloading. Do not stop the diesel engine

immediately let it warm down. Stopping the

diesel engine suddenly may raise the

temperature of the engine abnormally and

lock the nozzle and damage the diesel engine.

Note:

1. If the speed handle is in the “Stop”

position and the engine is still running,

turn the fuel switch to the “OFF”

position or loosen the high pressure oil

pipe nut. The engine could be

stopped more than one-way other than

the speed handle way.

2. If you cannot stop the engine with a load

on it, then remove the load first than

stop the engine.

Fuel switch

High-pressure

fuel pipe nut

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Comments to this Manuals

No comments

ETQ DG6LE Owner's Manual Page 15

Comments to this Manuals

Related products and manuals for Power generators ETQ DG6LE